Auto Dishwasher Descaler Part B

Description

THIS IS A DANGEROUS GOODS PRODUCT, Shipping and Costs may vary. Scale Removal Agent Second part of a two-part cleaning system for descaling and sanitising industrial and commercial dishwashers. Directions PVC rubber gloves and wrap around safety glasses essential. Ensure PART A has been completed prior to starting PART B. Approximately fill main wash tank. Add Descale B to wash tank at a ratio of 1 LTR to every 5 LTRS of wash water. (ie if wash tank is 10LTRS then add 2LTRS of Descale B when tank is 70% full and check that chemical is not going down the overflow drain). Allow tank to completely fill as Rinse Water fills tank. Cycle Machine for 8-10 X 1 minute cycles, checking scale removal results as you go. Scale should become removed from the surface. Agitate with a stiff brush to assist break up scale, as required through wash cycles. Remove drain bung and empty wash tank solution. Refill wash tank with fresh water, and circulate for 3 X 1 minute cycles. Remove drain bung and empty wash tank solution. Turn chemical dosing pump on and ensure wash tank is refilled and detergent supply returns to acceptable dosing level via titration tests. Never mix with Descale Part A.